Specialty removal

Shed Removal & Demolition

Every backyard shed lives the same life. It goes up full of good intentions, fills with tools and half-used bags of potting soil, starts to lean, and finally becomes the thing you walk past while pretending it is not there. Junk Rhinos handles shed removal from start to finish: we empty it, take it apart on site, haul every board, panel and shingle away, and leave a clear patch of yard where it stood.

Wood, metal or resin, a tidy 6x8 or a 12x16 with a floor and a loft, the crew brings the tools for the teardown and the truck space for the pieces. You get a firm price on-site before anyone picks up a pry bar, and nothing is owed until the shed is gone.

Half-dismantled wooden shed in a backyard, with its wall panels and boards on the grass

Published prices

What shed removal costs

Most sheds fill a quarter truck to a full truck, and the biggest can need more: prices start from $290, with the teardown included, and a full truck is $729. A packed shed adds an eighth to half a truck of contents, and a concrete slab is quoted separately by weight.

  1. Single item~1/16 truckfrom $199
  2. 1/8 truck~half a pickup bedfrom $199
  3. 1/4 truck1 pickup bedfrom $290Typical for this job
  4. 1/2 truck~2 pickup bedsfrom $450Typical for this job
  5. 3/4 truck~3 pickup bedsfrom $590Typical for this job
  6. Full truck~18 cu ydfrom $729Typical for this job

Examples

  • Empty 6x8 metal or resin shed1/4 truck, from $290
  • 8x10 wood shed with a light floor or none1/2 truck, from $450
  • 10x12 wood shed with a floor and shingled roof3/4 truck, from $590
  • 12x16 or larger with a floor, loft or ramp (sometimes more than a full truck)Full truck, from $729

Ballpark prices from our published rates. The crew confirms your firm, all-in price free on-site before any work starts. No deposit. Pay online when you book, or after the job.

Why shed demolition is more than a haul-away

A shed is a small building, and it comes down like one. Roofing has to be stripped, sheathing pried off, walls unscrewed or cut into sections, and the floor frame broken up before any of it fits on a truck. Metal sheds hide a few hundred small screws and panel edges sharp enough to open a glove. Resin sheds snap together when new and turn brittle after fifteen summers. And almost every shed is still full of something.

So shed demolition and removal is a dismantling job first and a hauling job second. It goes faster, and with fewer trips to urgent care, when the crew knows where the screws hide and which wall is holding up the roof.

What our shed removal service includes

  1. Walk-through and firm price

    The crew checks the shed, its contents, what it sits on and the path to the truck, then confirms an all-in price during the free on-site estimate.

  2. Contents out first

    Everything inside comes out before demolition starts. Anything you want to keep gets set aside on the lawn; the rest is sorted for donation, recycling or disposal and loaded first.

  3. Teardown on site

    We take the shed apart from the top down: shingles and roof panels, then walls, then the floor. Wood is cut into carryable lengths, metal panels are unscrewed and stacked flat, and resin panels are separated or broken down.

  4. Load and haul

    Every piece goes to the truck by hand, with lawns, garden beds and fences protected along the way. Loose nails and screws are picked up with the debris, including the ones that made a run for the grass.

  5. Clear the footprint

    We rake and sweep the spot where the shed stood and leave the base ready for whatever comes next. If a concrete slab needs to go too, that is quoted separately as a heavy-material job.

Shed removal jobs we handle

Nobody tears down a shed they love. The calls tend to sound like one of these.

The old wooden shed that started to lean

The classic old shed removal: a rotted floor, soft corners, a door that has not latched in years. Rot usually makes the teardown quicker, since the fasteners gave up years ago, but the crew tests every step on that floor.

Metal sheds that rusted through

Thin steel panels, a lot of screws, and edges that cut. The crew unscrews or snips the panels, stacks them flat, and the whole thing goes to scrap metal recycling. A small metal shed is one of the lighter jobs on this page, and the price reflects that.

Resin and plastic sheds

Resin sheds come apart in panels when they are young and in shards when they are old. Either way they are light and quick to load. Intact panels are recycled where a local facility accepts them; sun-cracked plastic goes to disposal.

Big sheds with floors, lofts and shingled roofs

A 12x16 or larger shed with a plywood floor on treated skids, a loft, a ramp and an asphalt-shingle roof is a real teardown. It often fills a full truck on its own, which is where shed demolition cost climbs. If the structure sits on a poured foundation, has plumbing, or is closer to a garage than a shed, call first and we will tell you honestly whether it is a removal job or a job for a demolition contractor.

Making room for a new shed, a pool or a garden

The new shed has a delivery date and the old one is standing exactly where it goes. We schedule ahead of delivery and leave the base clear. If the new plan is a deck or a patio, the old shed's slab can come out on the same visit through our concrete removal service.

A tree came down on it

If the tree is still resting on the roof, have a tree service cut it off first; once the shed is safe to approach, we take the wreckage, the branches and the soaked contents on one truck. Leftover limbs and brush fall under yard debris removal.

Straight talk

Before we arrive

Disconnect any power

If the shed has lights or outlets, the feed must be disconnected by an electrician before removal day. That is licensed-trade work, and no honest hauler should be improvising it. An extension cord from the house just gets unplugged.

Check whether you need a permit

Most small backyard sheds need no permit to remove. Some towns, HOAs and historic districts do require a demolition permit for larger accessory buildings, so check with your local building department or HOA before the date. We do not pull permits on your behalf.

Wasps, mice and other tenants

Sheds attract wasp nests under the eaves, mice in the insulation, and the occasional skunk under the floor. Have an active wasp nest treated a day or two before removal, and call wildlife removal if an animal has moved in. The crew does not mind mouse droppings, but it does not argue with a skunk.

Point out what stays

You do not need to empty the shed. Just point out what stays: the good shovel, the bike that still works, the Christmas lights you swear you will untangle.

Permit thresholds are specific to each town. In Seattle, for example, the Department of Construction and Inspections requires a demolition permit to remove a building but exempts a one-story accessory structure with less than 120 square feet of roof area on pier blocks or a slab on grade, so a 12x16 shed there needs one. Ask your building department with the shed's size in hand, and if there is an HOA, get its approval before removal day. Permits and HOA approvals stay with the property owner.

Call 811 before anyone digs

Taking a shed down and hauling it away involves no digging. Pulling what holds it in the ground can: concrete footings, or posts and piers set below grade. If any of that is coming out, call 811 first. It is the free national call-before-you-dig number, and the Common Ground Alliance's 811 site asks you to make the request a few business days before digging starts, so each utility has time to mark its buried lines.

Calling 811 connects you to the one-call center for your area. PHMSA, the federal pipeline safety agency, notes that state law requires the call before digging. Most states want a few business days' notice, and the exact period is set by state law, so your 811 center has the rule. Once the marks are down, dig around them, not on them. That applies whoever does the digging.

What we take and what we do not

  • Wood, metal and resin shed structures, including doors, windows and trim
  • Wooden floors, skids and floor framing
  • Asphalt shingles, roof felt and metal roof panels
  • Shed contents: tools, shelving, garden furniture, bikes, pots, hoses and old sports gear
  • Lawn mowers and trimmers, with fuel and oil drained first
  • Pavers and concrete blocks the shed sat on, in quantities agreed during the estimate

We do not take paint, stains, solvents, pesticides, fuel or propane tanks; your local household hazardous waste program is the right home for those. We also do not take suspected asbestos. Older sheds sometimes have cement-asbestos siding or corrugated roof panels; if yours might, have it tested, and use a licensed abatement contractor if it is positive. Concrete slabs are handled separately under concrete removal and priced by weight.

What does shed removal cost?

Shed removal cost comes down to three things: how big the shed is, what it is built from, and what is inside and underneath it. Pricing follows our volume model, with the dismantling labor built into the all-in figure the crew confirms on-site, free, before work begins. A gravel pad is left in place and raked level, which makes a good base for a new shed. A concrete slab is heavy material, quoted separately through concrete removal.

To give you a feel for size: an empty 6x8 metal or resin shed takes about a quarter of the truck, an 8x10 wood shed with a light floor or none about half, and a 10x12 wood shed with a floor and shingled roof around three quarters. A 12x16 or larger shed with a floor, loft or ramp usually fills the whole truck, sometimes more, and the contents of a packed shed add an eighth to half a truck on top. Our pricing page explains how the truck-space tiers work.

In dollar terms, those sizes start from $290 for the empty 6x8 metal or resin shed, $450 for the 8x10 wood shed and $590 for the 10x12 with a floor and shingles, and a full truck for a 12x16 or larger is $729, sometimes with more than one load. A packed shed moves up a tier or two once its contents are loaded. These are starting prices; the firm, all-in figure comes from the free on-site estimate.

  • Priced by the truck space your load fills
  • Firm, all-in price confirmed free on-site
  • No deposit, and nothing owed until it is done
  • Labor, hauling and disposal fees all included

How long does shed removal take?

A small metal shed usually comes down and leaves in about an hour. A 10x12 wood shed with a floor and a shingled roof typically takes two to four hours. A large shed packed with contents can take most of a day. Same-day and next-day slots are available in most areas, and the crew gives you a realistic timeline at the walk-through.

What happens to the materials

Steel panels, frames and hardware go to scrap metal recycling. Clean, untreated lumber goes to wood recycling where a local facility takes it. Pressure-treated skids and floor framing cannot be burned or chipped into mulch, so they go to a landfill that accepts treated wood. Usable contents, such as working tools and bikes, are donated where a local charity accepts them.

Old grills (with the propane tank off), a rusted wheelbarrow and the bike frames nobody is going to fix can ride on the same truck, and when a pile is mostly metal, our scrap metal removal service handles that kind of load.

Frequently asked questions

How much does it cost to remove an old shed?

It depends on volume, labor, weight and access: how much truck space the shed and its contents fill, how much dismantling it takes, whether heavy material like a concrete slab is involved, and how far the pieces travel to the truck. Most sheds fall between a quarter truck and a full truck. The crew confirms the firm, all-in price free on-site before starting.

Do I have to take the shed apart before you come?

No. Tearing it down is the job. The crew dismantles the shed on site, carries out the pieces and cleans up the footprint.

Is there free shed removal near me?

Occasionally someone will take a shed that is still in good shape if they move it themselves, so a local listing is worth a try. A shed that is rotted, rusted or crushed needs labor and disposal, which is why removal is a paid service.

Do I need a permit to remove a shed?

Usually not for a small backyard shed, but some towns, HOAs and historic districts require one for larger buildings. Check with your local building department before the removal date.

Can you remove the concrete slab too?

Yes, through our concrete removal service. Concrete is priced by weight, so the slab is quoted separately from the shed itself.

Who disconnects the electricity to the shed?

A licensed electrician, before removal day. We handle everything after the circuit is dead.

Do you remove metal sheds?

Yes. Metal sheds are among the quickest teardowns, and the steel goes to scrap metal recycling.

There is a wasp nest in my shed. What should I do?

Have an active nest treated a day or two before removal day. Old, empty nests are not a problem and go with the rest of the debris.

Will removal damage my lawn or fence?

The crew carries pieces out by hand and protects lawns, beds and fences along the route. The grass under the shed will stay pale for a while, which no crew can fix.

Do you offer shed removal in my area?

We have local crews in most areas, with same-day or next-day scheduling in many of them. Check the locations page or call (877) 283-1595.

Do I need to call 811 before shed removal?

Not for the shed itself: taking it down and hauling it away involves no digging. If concrete footings, buried posts or piers are coming out of the ground, call 811 a few business days ahead so buried lines are marked first. The call and the marking are free, and the exact notice period is set by state law.

How much does it cost to remove a 10x12 shed?

A 10x12 wood shed with a floor and a shingled roof usually takes about three quarters of the truck, from $590, with the teardown included. A packed shed adds an eighth to half a truck of contents, and a concrete slab is quoted separately by weight. The crew confirms the firm, all-in price free on-site.

Who is responsible for the permit to remove a shed?

The property owner. We do not pull permits, so check with your building department, and your HOA if you have one, before removal day. Small sheds often need nothing; larger ones can need a demolition permit.

Sources we checked

Rules and fees on this page come from these official sources. Local rules can differ, so check with your city or county too.

  1. Before You Dig (call811.com now redirects to 811beforeyoudig.com, 'A Common Ground Alliance Initiative')Common Ground Alliance (811). Checked .
  2. Call Before You Dig!Pipeline and Hazardous Materials Safety Administration (PHMSA), U.S. Department of Transportation. Checked .
  3. Demolition Permit - BuildingCity of Seattle, Department of Construction and Inspections. Checked .
  4. Learn About AsbestosU.S. Environmental Protection Agency. Checked .
  5. Household Hazardous Waste (HHW)U.S. Environmental Protection Agency. Checked .
  6. Chromated Arsenicals (CCA)U.S. Environmental Protection Agency. Checked .

Ready when you are

Get the leaning shed out of the corner of the yard for good. Call (877) 283-1595 or request a free estimate online, and by the time the truck pulls away, all that is left is a raked patch of ground.