Item removal

Scrap Metal Removal and Pickup

Metal piles up where nobody looks: a rusted grill behind the garage, a dead water heater, gutters from the last roof job, bikes nobody has ridden since middle school. Junk Rhinos picks up scrap metal from wherever it sits, in the garage, the yard or the basement, loads every piece and takes it to recycling instead of a landfill.

One thing first, because everyone asks: we do not pay for scrap. Scrap metal pickup is a paid service, priced by the truck space your pile fills, the same as every job we do. If you have a truck, a free afternoon and a strong back, a scrap yard will pay you for the metal, and this page explains how that works. If you do not, the crew does the lifting, the loading and the trip.

Packed garage of boxes, shelving and stored items with the door open

Published prices

What scrap metal pickup costs

Scrap pickup is priced by the truck space your metal fills: from $199 for a single item like a grill or a water heater, and from $450 for a garage corner of mixed scrap. A metal swing set takes about an eighth of the truck. The firm, all-in price is confirmed free on-site.

  1. Single item~1/16 truckfrom $199Typical for this job
  2. 1/8 truck~half a pickup bedfrom $199Typical for this job
  3. 1/4 truck1 pickup bedfrom $290Typical for this job
  4. 1/2 truck~2 pickup bedsfrom $450Typical for this job
  5. 3/4 truck~3 pickup bedsfrom $590
  6. Full truck~18 cu ydfrom $729

Examples

  • One item: a grill, a water heater or an appliance shellSingle item, from $199
  • A metal swing set, taken apart1/8 truck, from $199
  • A small room's worth of metal odds and ends: bikes, gutters, old shelving1/4 truck, from $290
  • A garage corner of mixed scrap1/2 truck, from $450

Ballpark prices from our published rates. The crew confirms your firm, all-in price free on-site before any work starts. No deposit. Pay online when you book, or after the job.

Straight talk

Do you pay for scrap metal?

No, and we would rather say so before you book than at the curb. Some people expect a scrap pickup to work like a sale: a truck shows up, takes the metal and leaves cash. Our pickup is a removal service. The price covers the crew, the truck, the loading and the trip to recycling, and it is confirmed free on-site before anything moves. If getting paid for the metal matters more to you than the labor, the next section is for you.

Who pays for scrap metal

Scrap yards, also called scrap metal recyclers, buy metal by weight, and the price per pound moves with the type of metal and the market. If you can load it and deliver it yourself, that is where the money is. A few things help:

  • Separate the metals. Most steel and iron stick to a magnet; aluminum, copper and brass do not, and yards usually pay more per pound for those nonferrous metals than for steel. Stainless steel often fails the magnet test, so ask the yard how it grades it.
  • Call ahead. Ask what the yard accepts, what it pays this week and what it needs from you when you sell.
  • Strip what is not metal. Wood, plastic and rubber still attached usually lower what a yard pays.
  • Expect paperwork for fridges and AC units. Under the EPA's safe disposal requirements, a yard that accepts an appliance with its refrigerant already removed must keep a signed statement from the person who dropped it off, with the name and address of whoever recovered the refrigerant and the date.

For a single bike or a bed frame, the drive can cost more than the metal brings, so a bulk pickup day, a free listing or a neighbor who collects scrap may be the simpler route. Book a pickup when you want the metal gone without loading and hauling it yourself, especially when the pile is big, heavy or mixed, or has to come out of a basement or a backyard.

What counts as scrap metal

If it is mostly metal and not hazardous, it can go. Common scrap metal pickups:

  • Appliance shells: washers, dryers, stoves and dishwashers, disconnected first
  • Water heaters, drained and disconnected by a plumber
  • Grills, with the propane tank removed
  • Bikes, metal exercise equipment and old sports gear
  • Swing sets, trampoline frames and basketball poles
  • Chain link and metal fencing, gates and posts
  • Aluminum and steel siding, gutters and downspouts
  • Metal furniture: patio sets, bed frames, shelving, filing cabinets and desks
  • Lawn mowers and snow blowers, with fuel and oil drained first
  • Car parts from a finished project, drained of fluids

Swing sets, playsets and fences that are still standing get taken down too; our playset and fence removal service covers the teardown. For gutters, siding and metal from a renovation or a roof job, see construction debris removal.

Refrigerators, freezers and AC units

A fridge, a freezer or a window air conditioner is mostly steel, but it is not plain scrap. These units hold refrigerant, and under the EPA's safe disposal requirements the final stop in the disposal chain, such as a scrap metal recycler or a landfill, is responsible for making sure the refrigerant is recovered before the unit is disposed of. We handle them as refrigerant-bearing appliances, not as loose metal. They can ride on the same pickup as the rest of your scrap; see refrigerator removal for how those units are handled. Empty a fridge or freezer before the crew arrives.

What we cannot take

Hazardous materials stay off the truck: paint, chemicals, solvents, fuels, oil and asbestos. Two items turn up in scrap piles often enough to need their own mention.

Propane tanks

We do not take propane tanks, full, empty or attached to a grill, so take the tank off before the crew arrives. Where a tank can go is set locally. King County, Washington, for example, takes empty or partly full tanks of 8 gallons or less at its household hazardous waste facilities and does not accept propane tanks at its transfer stations. Check your own county's household hazardous waste program.

Car batteries

Lead-acid car batteries are not part of a scrap pickup. The EPA says to return them to a battery retailer or to your local solid or household hazardous waste collection program, and not to put them in the trash or a municipal recycling bin.

What our scrap metal pickup includes

  1. Photo and ballpark

    Send a photo or describe the pile, and we reply with a ballpark based on the truck space it will take.

  2. Firm price on-site

    The crew looks at the actual load and confirms a firm, all-in price, free, before anything moves.

  3. Take it apart

    Swing sets, shelving and frames that will not fit through a gate or a door are unbolted or cut into sections on the spot.

  4. Carry and load

    The crew carries every piece from where it sits, basement stairs and backyards included. Nothing needs to be dragged to the curb first.

  5. Sort and sweep

    Metal goes to recycling, usable items go to donation where a charity will take them, and the area is swept or raked before we leave.

What does scrap metal removal cost?

Scrap metal removal is priced like everything else we haul: by the truck space the load fills. One grill or water heater is a single-item pickup, a metal swing set takes about an eighth of the truck, and a garage corner of mixed metal runs about half. The price the crew confirms on-site covers the labor, any cutting or unbolting, the loading and the trip to recycling. Our pricing page explains the truck-space tiers.

  • Priced by the truck space your load fills
  • Firm, all-in price confirmed free on-site
  • No deposit, and nothing owed until it is done
  • Labor, hauling and disposal fees all included

Where your scrap metal goes

Metal is one of the easiest things we haul to keep out of a landfill. Steel, aluminum and other metals go to metal recycling, where they are sorted and melted down for reuse. A bike that still rides or a patio set in good shape goes to a local charity where one will take it. Only what cannot be recycled or donated, such as rotted wood or cracked plastic attached to the metal, goes to disposal. Clearing more than the metal? Our garage cleanout service takes the scrap and everything around it in one visit.

Frequently asked questions

Will you pay me for my scrap metal?

No. Scrap metal pickup is a paid service, priced by the truck space your metal fills. If you want to be paid for the metal, a scrap yard will buy it by weight when you deliver it yourself.

Is there a free scrap metal pickup?

Sometimes. Some cities collect metal items on bulk pickup days, and some scrap collectors will haul off metal they can resell. Both run on their own schedule, take only what they want and usually need it at the curb. We pick up from where it sits, take the whole pile and charge by truck space.

What scrap metal do you pick up?

Appliance shells, water heaters, grills without the propane tank, bikes, swing sets, fencing, siding, gutters, metal furniture, shelving and drained lawn equipment. If it is mostly metal and not hazardous, it can go.

Do I need to cut up or take apart the metal first?

No. The crew unbolts or cuts what will not fit through a gate or a door, and carries everything out from where it sits.

Do you take refrigerators and air conditioners as scrap?

Yes, but not as loose scrap. They hold refrigerant, so they are handled as refrigerant-bearing appliances; see refrigerator removal. Empty a fridge or freezer before pickup.

Do you take propane tanks or car batteries?

No. Take propane tanks off grills before the crew arrives and ask your local household hazardous waste program where they go. Car batteries go back to a battery retailer or to a household hazardous waste collection, as the EPA advises.

Can you take an old water heater?

Yes, once a plumber has drained and disconnected it. It counts as a single item on its own, or rides along with the rest of the pile.

What is the difference between ferrous and nonferrous scrap?

Ferrous metals, mainly steel and iron, usually stick to a magnet, though some stainless steel does not. Nonferrous metals, such as aluminum, copper and brass, do not, and scrap yards usually pay more per pound for them. It only matters if you are selling the metal yourself; on our pickup it all goes on the same truck.

Do you pick up scrap metal from a renovation or roofing job?

Yes. Old gutters, downspouts, siding, flashing offcuts and metal framing go on the truck with the rest of the debris.

Can you take a lawn mower or snow blower?

Yes, with the fuel and oil drained first. Those fluids fall under our hazardous materials exclusion and belong with your local hazardous waste program.

Sources we checked

Rules and fees on this page come from these official sources. Local rules can differ, so check with your city or county too.

  1. Stationary Refrigeration Safe Disposal RequirementsU.S. Environmental Protection Agency (EPA). Checked .
  2. Used Household BatteriesU.S. Environmental Protection Agency (EPA). Checked .
  3. Compressed gas cylinders disposalKing County, Washington - Hazardous Waste Management Program. Checked .

Ready when you are

That metal pile will outlast all of us if nobody moves it. Call (877) 283-1595 or request a free estimate online, and it can be gone as soon as today in most areas.